Reltech Platinum Pool & Spa Pump 1.5hp PLT150 Pool – 75,000L

The Reltech Platinum Pool & Spa Pump 1.5hp PLT150 sets a new standard in pool water circulation for larger installations. Built for pools up approximately to 75,000 litres, this robust Platinum Pool & Spa Pump delivers a powerful 420 LPM at an 8m head, ensuring your pool water remains fresh and sparkling. Manufactured in Australia from premium engineering grade thermoplastic enhanced with UV additives, the PLT150 is engineered to withstand harsh conditions while offering extended durability and performance. Its advanced design, including an extra large leaf basket and user friendly features, makes routine cleaning and maintenance a breeze. Perfect for both residential luxury pools and commercial spa settings, the Platinum PLT150 combines efficiency with quiet operation, delivering optimal water turnover and energy savings.

Choose from 3 Platinum Models

• Platinum PLT100 – 1hp – Pool size up to approximately 55,000L
• Platinum PLT150 – 1.5hp – Pool size up to approximately 75,000L
• Platinum PLT200 – 2hp – Pool size up to approximately 100,000L

Key Features of the Reltech Platinum Pool & Spa PLT150 1.5hp

• High performance water circulation with 420 LPM at an 8m head
• Suitable for pools up to 75,000 litres
• Energy efficient operation with quiet performance (maximum noise of 63 dB(A) at 1m)
• Constructed from durable, Australian made engineering grade thermoplastic with UV additives
• User friendly installation with self aligning inlet and outlet barrel unions compatible with 50mm or 65mm PVC pipes
• Extra large leaf basket for reduced cleaning frequency
• Built in thermal overload protection for continuous duty operation

Specifications for the Reltech Platinum Pool & Spa PLT150 1hp

• Model: PLT150
• Motor Power: 1.5 HP
• Flow Rate: 420 LPM @ 8m head
• Voltage/Phase: 240V / Single Phase
• Full Load Amps: 6.10 A
• Power Consumption: 1205 Watts
• Maximum Noise: 63 dB(A) @ 1m
• Pump Length: 720 mm
• Suitable Pool Capacity: Up to 75,000 litres
• Warranty: 3 year limited warranty covering workmanship and materials

Installation Guide for the Reltech Platinum Pool & Spa PLT100 1hp

• Position the pump on a stable, well drained base near your pool water source for easy maintenance and optimal priming.
• Ensure the pump’s rear fan shroud is at least 100mm clear of any obstructions to provide sufficient cooling.
• Connect the pump using self aligning inlet and outlet barrel unions designed for 50mm or 65mm PVC pipes; a straight run of pipe (minimum 300mm) before the inlet is recommended for smoother operation.
• Prime the pump by removing the strainer basket lid, filling the basket area with water, then securely replacing the lid before powering on.
• Use the supplied 2m power lead to connect to a 240V 50Hz power outlet. For hard wired installations, always engage a qualified electrician.
• Once installed, switch on the pump and verify a consistent water flow free from air pockets.

What’s in the Box

• Platinum Pool & Spa 1hp Reltech 1.5hp PLT150 Pump
• 2m power lead with 10amp three pin plug
• Installation and Operating Manual
• Warranty Documentation